Concord Integrated Security System
Benefits:
Single location panel for use
within finished or unfinished (under construction) areas.
Initial allowance for 16 wireless zones
and 8 hardwire zones.
Expansion capability for additional
Hardwire zones (up to 32).
Expansion capability for remote or
premise phone control.
Expansion capability for control of
X10 devices.
Optional control of multiple wired
and wireless keypads.
Disadvantages:
Limited range of operation for
areas with potential of extreme RF Interference. RF Receiver is onboard
therefore installation compromises may be necessary limiting range. (See Concord
Hybrid or Advent
for solutions)
Applications:
Single Dwelling homes finished and under
construction with less than 4500 sq. ft. with limited RF interference potential
and a potential desire for future sensor additions on current perimeter doors
and windows.
Description
The Concord Hybrid and Integrated panels are standard with 8 hardwire zone
inputs. You can add up to 4 SuperBus® RF Receivers to both panels. Concord
Integrated has a 16- or 32- zone RF Receiver built-in. Both panels offer
expansion with profitable options.
Features
- Hybrid: 8 standard hardwire zones; 76 maximum zones
- Integrated: 8 standard hardwire and 16 or 32 integrated wireless zones; 76
maximum zones
- 2 partitions
- 2 onboard programmable outputs
- 2- and 4-wire smoke detector compatibility
- Compatable with all ITI wireless Learn Mode™ sensors (with RF Receiver
installed)
- 60 user-programmable access codes with programmable authority levels
- Latchkey numeric paging - by user code and key fobs
- 100-event history buffer
- Quick exit
- Quick arming
- Up to 16 scheduled events
- Lights
- Latchkey
- Output Relays
- Scheduled Arming
- Built-in 12-watt siren driver
- Voice annunciation of alarm events, using the Phone Interface/Voice Module
- SIA False Alarm Reduction features
Specifications
Color: Gray
Dimensions: 12.25" wide, 12.25" high, 3.0" deep
Power supply: 30 VA transformer provides 1 amp continuous power; optional 50
VA provides 2 amps
Auxiliary power outputs: Regulated, current limited, fused 12 VDC output at 1
amp maximum (with 30 VA transformer)
Battery backup: 12 VDC, 2 Ah, 4 Ah, or 7 Ah rechargeable, sealed, lead-acid.
Installation: Wall-mount; SnapCard expansion module fits inside Concord
housing.
Programming: Menu-driven via SuperBus alphanumeric touchpads; ITI ToolBox®
software
Reporting: SIA 2 and Contact ID
Compatibility: Supports all ITI Learn Mode crystal and SAW sensors